Measurement Computing 121 Operating Manual page 2

Operating Manual
Warranty
Measurement Specialties, Inc. accelerometers
are warranted during a period of one year from
date of shipment to original purchaser to be free
from defects in material and workmanship. The
liability of Seller under this warranty is limited to
replacing or repairing any instrument or
component thereof which is returned by Buyer,
at his expense, during such period and which
has not been subjected to misuse, neglect,
improper installation, repair, alteration, or
accident. Seller shall have the right to final
determination as to the existence and cause of a
defect. In no event shall Seller be liable for
collateral or consequential damages. This
warrant is in lieu of any other warranty,
expressed, implied, or statutory; and no
agreement extending or modifying it will be
binding upon Seller unless in writing and signed
by a duly authorized officer.
Receiving Inspection
Every Measurement Specialties, Inc.
accelerometer is carefully inspected and is in
perfect working condition at the time of
shipment. Each accelerometer should be
checked as soon as it is received. If the unit is
damaged in any way, or fails to operate, a claim
should immediately be filed with the
transportation company.
Service Concerns
If a Measurement Specialties, Inc. instrument
requires service, first contact the nearest
Measurement Specialties, Inc. representative.
They may be able to solve the problem without
returning the unit to the factory. If it is
determined that factory service is required, call
Customer Service at the regional headquarters
for an RMA number before return.
Returns
All units being returned to the factory require an
RMA (Return Material Authorization) number
before they will be accepted. This number may
Measurement Specialties, Inc.
32 Journey, Suite 150, Aliso Viejo, CA 92656 USA
be obtained by calling Customer Service at the
regional headquarters with the following
information; model number(s), quantity, serial
number(s), and symptoms of the problem, if
being returned for service. You must include the
original purchase order number if under
warranty.
Recalibration Services
The Vibration Sensors Design Center and its
two manufacturing facilities in China and France
offer factory re-calibration services for Variable
Capacitance, Piezoresistive, Piezoelectric
(including IEPE, ICP etc.) accelerometers and
Electronics. NIST (US), DKD (Germany),
COFRAC (France) traceable calibration services
on sensitivity at 100 Hz (102 or 120 Hz in
Europe) and full frequency sweeps are offered.
Contact the regional headquarters for pricing
information.
Inquiries
Address all inquiries on operation or applications
to your nearest Sales Representative, or to the
Vibration Applications Support as follows:
Global Headquarters
1000 Lucas Way
Hampton, VA 23666, USA
Tel: +1 757 766 1500
Vibration Sensors Design Center
32 Journey, Suite 150
Aliso Viejo, CA 92656, USA
Tel: +1 949 716 7324
European Headquarters
Impasse Jeanne BENOZZI
CS 83 163, 31027 Toulouse Cedex 3, France
Tel: +33 (0) 582 08 22 00
Asian Headquarters
Measurement Specialties (China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057, China
Tel: +86 755 3330 5088
www.meas-spec.com
2 of 19
TM
+1 949-716-5377
t&m@meas-spec.com