Table of Contents
Advertisement
Care of Your Monitor
Installation
•
Do not cover or block the ventilation holes in the case.
•
Do not install the monitor near heat sources such as radiators or
air ducts, or in a place subject to direct sunlight, excessive dust,
mechanical vibration or shock.
•
Optional Video adaptor installation
•
Turn off the power switch and unplug the monitor before
installation to avoid electric shock or damage.
•
Install the optional video adaptor on a stable surface. The monitor
may cause injury or damage if it falls or is dropped.
Power connection
•
Use an appropriate power cord for your local power supply.
•
The outlet should be installed near the monitor and be easily
accessible.
•
Do not allow anything to rest on the power cord.
•
Disconnect the power plug from the power outlet under following
conditions:
•
•
•
•
Maintenance
•
Clean the cabinet, glass, and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent, such as alcohol or
benzene.
If you will not use it for an indefinite period time.
When the power cord or plug is damaged of frayed.
If the product has been dropped or the cabinet has been
damaged.
If the product exhibits a distinct change in performance,
indicate a need for service.
4
Advertisement
Table of Contents
