-
corner of the room on the floor,
-
hidden in fully enclosed wooden/glass cupboard,
-
behind-beside-below fish-tank,
-
near microwave oven,
-
on top of fridge,
-
etc
How do I access the PRC2402M WebGUI after finished setting up?
Ans. Follow below steps;
Step 1. Ensure that the Wi-Fi Client / Wired Client is connected to PRC2402M
Step 2. Choose either one of below 2 options:
Option1. Laptop / Desktop - Go to
login
Option2. Mobile phone - Launch mXtend App > Existing Setup > login
Why is the Client List page not showing up after clicking onto the page link?
Ans. Client list page loading may take an approximately 12 seconds, please wait a little
while more as the request is being processed. Note that every time it is clicked, the request
to pull client list is being reprocessed.
Can the PRC2402M support AP mode?
Ans. Yes. PRC2402M can support AP mode. Note that in AP mode, all NAT or Firewall
related features (example DDNS, Port forwarding) will not be available.
How do I set PRC2402M as AP mode instead of default Router mode?
Ans. From Factory default mode, Select AP Mode during Setup Wizard
How to set the PRC2402M to support VLAN Internet setting?
Ans. Follow below steps;
Step 1. Connect a PC / Laptop / Mobile to PRC2402M and Login
or through mXtend App)
Step 2. Click Setup > click Internet Settings > click VLAN > Fill in the correct VLAN
values and click Apply to proceed.
Step 3. Connect the Set Top Box to PRC2402M main router's LAN 3
http://prc2402m.setup
PRC2402M FAQ
v1.0_150920
or
https://prc2402m.setup
(http://prc2402m.setup
Page 3 / 7
>