How To Reserve Ip Address To A Specific Device; How To Recover Internet After Connecting Isp Ont To Prc2402M Wan Port - PROLiNK Xtend Pro Frequently Asked Questions Manual

How to reserve IP Address to a specific device?

Ans. Follow below steps;
Step 1. Go to
Static IP
Step 2. Fill in the fields > click [+]
Notes:
a. Ensure the Assigned IP Address is not clashing with any of existing connected
client.
b. Ensure that the MAC Address tallies the actual device to be assigned.
c. IF the device is currently connected to the mesh, power off / on the device again
so that it is able do get the newly assigned IP Address.
d. Currently it supports up to 10 DHCP IP reservation list.

How to recover Internet after connecting ISP ONT to PRC2402M WAN port?

Ans. Follow below steps;
Step 1. Ensure/double check if there is a need to have VLAN settings configured on
the subscribed ISP. Please proceed to set accordingly if there is a need to set VLAN.
Step 2. Power-Off both ONT and PRC2402M router unit for 30 minutes
Step 3. After 30 minutes, Power-On the ONT and wait until Internet LED turns Green.
Step 4. Ensure that the physical connection from ONT to PRC2402M is correct (ONT
LAN port to PRC2402M WAN port).
Step 5. Power-On the PRC2402M unit.
http://prc2402m.setup > login > click Setup > click Client List > click
PRC2402M FAQ
v1.0_150920
Page 7 / 7