Table of Contents
Advertisement
Configuration of the dip-switches
Removing the housing cover to access Camera Settings.
Please open the main cover to access configuration dip-switches as shown below.
Ex WARNING: : DO NOT OPEN WHEN ENERGIZED
1.
The setting switch can be checked by unscrewing the wrench bolt and removing the
housing as shown above.
Note:
Each housing cover has a gap for separation on both sides. It can be easily removed by using two flat-
head Screwdrivers.
When reassembling, be sure the O-ring is correctly positioned
2.
Copyright © 2019 OPTICOM INTERNATIONAL INC., All Rights Reserved. Ver 1.1
CC03-IP2MZ30-E Operation Manual
series User's Manual
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
POTENTIAL ELECTROSTATIC CHARGING HAZARD
ss
Setting S/W
PTZ Type
.
14
Advertisement
Table of Contents
