Introduction - English; Dc Input - abi Professional ChipMaster Compact Operator's Manual

Digital ic tester
Table of Contents

Advertisement

Available languages

Available languages

1.

introduction - english

Thank you for purchasing the ABI
ChipMaster
Compact
Digital IC Tester.
The basic function of the ChipMaster
Compact Professional is to test a
digital IC for correct logical functioning
as described in the truth table and/or
function
table.
Compact applies the necessary signals to the inputs of the IC,
monitoring the outputs at each stage and comparing them with the
expected states. Any discrepancy results in a FAIL indication and the
faulty pins are shown on the integral display. Additional facilities are also
provided, amongst them test loops that can be used for goods inwards
inspection, detecting intermittent faults or simply providing a rapid
method of exercising any IC for demonstration or educational purposes.
Since the ChipMaster Compact contains an extensive IC library, it is not
necessary to program the unit yourself other than to key in the IC
number.
It is also capable of identifying an unknown IC using the
SEARCH mode - this is a feature that many users will find extremely
valuable.
The ChipMaster Compact Professional is provided with an RS-232
interface enabling it to be connected to a companion software package
called CompactLink running on a PC.
programmes for ICs not included in the internal library to be developed
and downloaded into the ChipMaster Compact memory to enhance the
library according to your wishes.
2.

DC input

The ChipMaster Compact is powered by four AA batteries or by the use
of the battery eliminator input at the rear of the case. To insert the
batteries, turn the unit upside down and remove the battery cover by
removing the two cross head screws holding it in place. The batteries
must be inserted in the correct orientation, as indicated by the drawing
within the battery compartment. Incorrect insertion of batteries will not
allow the unit to operate.
screws. If the battery voltage falls too low, a low battery warning symbol
will be displayed at the top left hand cell of the display in normal
ChipMaster Compact Digital IC Tester
Professional
The
ChipMaster
Replace the battery cover and insert the
Copyright © 1992-2009 ABI Electronics Limited
CompactLink allows test
Page 1

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for abi Professional ChipMaster Compact

Table of Contents