Table of Contents
Advertisement
Any power tool can be dangerous.
Please follow these simple procedures. They are for your protection.
Wear goggles ( chips – risk of injury)
Wear gloves (cutting damages by sharp edged work pieces)
Wear safety shoes
Wear protective clothing.
Remove rings, watches, ties etc. that could be torn by the machine.
Dress properly. Do not wear loose clothing or jewellery, it can be caught in moving parts.
Follow the general current and appropriate Accident Prevention and Safety Procedures.
Never work under the influence of alcohol, drugs or stronger medication.
Always make sure that you have a safe foothold.
Maintain a proper footing and balance at all time. Never work with the machine while standing on a ladder or
leaning against a scaffold.
Secure the working place well. Use clamps or a vice to fix the work piece. This is safer than using hands and clears
both hands for operating the machine.
Hold the machine tight during operation.
Keep your working area clean and uncluttered.
Keep children away and avoid other persons to come into contact with the machine.
Switch off the machine if it stops - for any reason - to avoid the unexpected starting in uncontrolled condition.
Do not operate the tool if it is damaged, improperly adjusted or not completely and correctly assembled.
Check hydraulic hose for damage.
Avoid sparks in hazardous environment - created by the tool. Always flush material and saw blade for cooling with
sufficient water during working.
Do not employ machines by excessive force. Their performance is better and safer, if they work at the prescribed
speed.
Check damaged parts.
SAFETY INSTRUCTIONS
3
Advertisement
Table of Contents
