Intended Use; Improper Use; Danger Zones - Ega Master Aqua Master 79908 Operating Instructions Manual

Before using the machine, damaged parts or protective devices should be carefully checked to make sure they work
soundly and fulfil the designated function. Check alignment, connections and attachment of moving parts. Also check
if parts are broken. Parts or protective devices that are damaged should, if nothing else is mentioned in these operating
instructions, only be exchanged or repaired by qualified personnel. The same applies to defective switches and valve
triggers. If the machine cannot be switched on or off with the valve trigger, it should not be used.
The use of other accessories, or other additional items than recommended in these operating instructions, may
include the risk of bodily injury.
Only operate the tool after a thorough training or under supervision of a trainer.
Never exceed the maximum operation pressure.
Follow the valid national provisions in the country of application.
ATTENTION! Never use the hydraulic hose as a lifting handle!
The machine is designed for drilling into concrete and masonry. The machine is intended to be used by professional
operators. Only authorized and trained personnel may use, maintain and repair the machine. The personnel has to be
especially instructed on the potential dangers. The working environment can be: construction site, factory, renovation,
rebuilding and building. Manipulation or modifications to the machine are not allowed. Observe the instructions
regarding the operation, care and maintenance in the operation instruction. Dangers can come from the machines and
the auxiliary materials, if improperly handled or used.
Any use deviating from the intended use as described is considered to be improper use. Working without personal
protection equipment.

Danger Zones

Operational
condition
--------------------
Life phase
Transport
Operation
Maintenance
4
Normal function
Transport of
the machine in
an inoperable
condition
Machine only works
with actuated valve
Machine moves the
tool
Operation at a
maintenance unit
USE

INTENDED USE

IMPROPER USE

Malfunction
Drop of the
machine
operable condition
Machine runs
Switch is blocked in
without actuated
actuated condition
valve
Tool blocks
Breakdown of the
machine
Improper use
Transport of the
machine in an
unknown
unknown
Expected use
unknown
unknown
unknown
unknown