Displayport; Sd Card; Wi-Fi And Bluetooth; Lte Modem - IMAGO VisionBox DAYTONA Hardware Manual

Table of Contents

Advertisement

5 Interfaces
5.4

DisplayPort

The DisplayPort 1.2a interface supports a link speed of up to 5.4 Gbps with 1, 2 or 4 lanes. The
maximum supported resolution is 3840 × 2160 at 60 Hz. To connect the DP Port with a DVI, HDMI
or VGA monitor, an active adapter is needed.
5.5

SD Card

The SD card socket supports SDHC and SDXC memory cards with a maximum interface speed of
104 MB/s (UHS-I).
5.6

Wi-Fi and Bluetooth

Two SMA connectors are shared between Wi-Fi and Bluetooth. Two antennas are used for
IEEE802.11n/ac Wi-Fi modes. The connectors are of type female RP-SMA.
5.7
4G / LTE Modem
The VisionBox can optionally be equipped with a 4G / LTE modem. One or two female SMA con-
nectors are then available.
Figure 7: DP connector
Figure 8: SD card socket
Figure 9: Wi-Fi SMA connectors
Figure 10: 4G / LTE connectors
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611
info@imago-technologies.com;
www.imago-technologies.com
Page 14 / 22

Advertisement

Table of Contents
loading

Table of Contents