802.11 5Ghz Receive Mode Script - Lantronix xPico 200 Series Certification Firmware Instructions

802.11 5Ghz Receive Mode Script

The nrate, channel, and chanspec parameters above work like the parameters from the above
transmit scripts.
The wl counters command will output receive mode statistics. The rxdfrmocast statistic lists
the received frames, which is useful when connected to an external signal generator. Run the wl
counters command before and after sending external frames to the unit and calculate the
difference between the before and after rxdfrmocast number to get the number of received good
frames.
xPico ® 200 Certification Firmware Instructions
wl down
wl mpc 0
wl country ALL
wl band a
wl scansuppress 1
wl chanspec -c 159 -b 5 -w 40 -s 0
wl bi 65535
wl up
wl out
wl channel
wl up
wl txant 0
wl antdiv 0
wl nrate -m 7 -s 0
wl counters
14