Advertisement
Easter : Bunny Egg Holder : Assembly Instructions
Assembling the ribbon
Wrap this part around a round
pencil or other such cylinder to make
it assume a curve.
Glue the rear sides of the dots first.
Glue the ribbon to the Easter Bunny.
Assembling the lid
Assemble three units of part 3-1.
Glue the rear side of part 3-3.
Glue the bottom surface first.
Glue part 3-4 into place after inserting
parts 3-1 into part 3-2.
The lid is complete!
©
Canon Inc.
©
Taka Taka
Assembling the egg holders (three in all)
The egg holders differ in color only.
Each is assembled in the same way.
Apply a curve to this
Glue each glue tab to
piece in the same way
the interior of the stand,
as with the ribbon, then
one tab at a time.
glue its ends together.
The egg stand
is complete!
Assembling the chicks (three in all)
Although the shapes and illustrations of
each chick differ slightly,
each one is assembled in the same way.
Advertisement
