de Gier I-DE User Manual page 7

2 Wiring Diagram
2.3 Current ouput
The current output of the I-DE can be used as
shown in the wiring diagram in figure 4. As should
be clear from figure 4 it is absolutely not per-
mitted to connect an additional (external) power
supply to the current output.
2.4 A/B/Z outputs
If "HTL" or "TTL" is selected for the A/B/Z out-
puts, then the wiring diagram in figure 5 should
be used.
If "Open Collector" is selected for the A/B/Z out-
puts, then the wiring diagram in figure 5 should
be supplemented with the wiring diagram in
Figure 6. .
7
De Gier B.V., Westlandseweg 9, 2291 PG WATERINGEN, THE NETHERLANDS,
+31 174 292089, sales@degierdrivesystems.com, www.degierdrivesystems.com
Versie 1 – 07/01/2021