de Gier I-DE User Manual page 13

3 Operation
3.5.1 Reset I-DE position (Main menu 1)
If the I-DE has lost its position, it can be reset to the calibrated reset point. To do this, follow the steps below.
NOTE: The step-by-step plan below assumes that the I-DE is currently in «main menu 1» (see Figure 7).
If the I-DE is in «Normal operation» or «Error mode», «Main menu 1» can be accessed by pushing and holding the
button for two seconds.
Reset I-DE position
The I-DE is in "Main menu 1".
Push and hold the button for two seconds, then release. After 2 seconds, this LED pattern will be displayed.
Turn the motor gearbox to the motor gearbox start position.
Push and hold the button for two seconds, then release. After 2 seconds, this LED pattern will be displayed.
The I-DE has been reset to the reset position.
The I-DE will return to "Main menu 1".
De Gier B.V., Westlandseweg 9, 2291 PG WATERINGEN, THE NETHERLANDS,
+31 174 292089, sales@degierdrivesystems.com, www.degierdrivesystems.com
Versie 1 – 07/01/2021
13