Flexispot EN1B Instructions

Keypad Instruction
Keypad
LED Display
Operation Guide
·Press the UP button or DOWN button to lift or lower the height of desk surface. The LED display
shows the real time value. The range of the height value: 28" - 47.6".
·Saving A Height Position
a. Press the UP button or DOWN button to lift or lower the height of desk surface. For instance, you
adjust the height to 29.5".
b. Press "M" SAVE button and the LED display shows" ", then press "1" to save the 1st height position
to 75 cm. The LED display shows "
c. Repeat step a and step b to save the 2nd height position to 39". The LED display shows "
the 3rd height position to 47". The LED display shows "
d. Press "1", "2","3", to automatically reach the height saved before.
·Long-Time Sitting Reminder
a. Press REMINDER button "A" to activate the function. The LED display shows "
b. Two seconds later, press the "
screen flashes. Then press any button to save the time setup, or wait 5 seconds and system will save
the time setup automatically. After time setting is finished, the system will automatically enter the
countdown, during the countdown, any operation will lead to a repeat starting of the timer. When the
countdown finishes, the buzzer will be active with a 10-second "DiDi...DiDi...DiDi..." tone.
c. Within the 10-second reminder buzz, press any button to reactivate the time countdown that is set up
in (b) step. If no operation during the 10-second reminder buzz, there will be another reminder buzz
after 5 minutes. No operation during the second buzz will turn off the Long-Time Sitting Reminder.
d. Press and hold the "A" button for three seconds to turn off the Long-Time Sitting Reminder. The LED
display shows " ".
·Reset function and Troubleshooting
a. Reset function definition：When LED display shows "
desk reaches its lowest height and rebound to stop and display shows the lowest height, reset process
finished.
b. When exception code occurred E01 or E02, please retry 18 mins later.
c. If the " " button doesn't work, please check the cable connection and then cut off the power for at
least 10 seconds. Reconnect to the power and press "
start the reset process by pressing "
After you try all those ways without resolving it, please contact the customer service.
".
" or "



" button to adjust the reminder time only when the display
" button.
FlexiSpot.com | +1 (855) 421-2808
▲
●
UP Button, used to lift the desk surface
" "
▼
●
" "
DOWN Button, used to lower the desk surface
● " 1 "
Position 1, User saves the 1st Height Position
2
● " " Position 2, User saves the 2nd Height Position
● " 3 " Position 3, User saves the 3rd Height Position
M
● " " SAVE button, used to save the height position
REMINDER button, used to activate the "Long-
● " A "
Time Sitting Reminder" function
".
", press and hold the "
" button and LED display shows "
/w ww.facebook.com/UPLIFTDe sk1 https://t witt er.com/UPLIFTDe sk https:/ /w ww.instagram.com/upliftdes k/ https://ww w.youtub e.com/u ser/thehumans olution
Keypad Instruction
". Save
"
" button until the
", then