Specifications - Milwaukee M18 FMTIW2F12 Operator's Manual

• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
SERVICE
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES
• Hold the power tool by insulated gripping
surfaces, when performing an operation where
the fastener may contact hidden wiring. Fas-
teners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
• Wear ear protectors when impact drilling. Exposure
to noise can cause hearing loss.
•
cally designed for use on impact wrenches and
drivers. Other sockets and accessories might shatter
or break causing injury.
•
If using with a lanyard, do not exceed maximum
capacity marked on the lanyard label. Always
determine the weight of the product, with all acces-
sories, when selecting the appropriate lanyard system.
Exceeding maximum capacity may result in serious
injury.
• For best results, use only with energy absorbing
lanyards. Ropes, straps or chains may break
and cause failure. Do not use with lanyards at
full tension.
•
To reduce the risk of injury,
WARNING
when
situations, wear
protection or use a suitable dust extraction
solution.
• Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you
feel the work is beyond your capability; contact
MILWAUKEE Tool or a trained professional for
®
additional information or training.
Charging im
working in
appropriate respiratory
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
•
WARNING
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
-
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
ADDITIONAL BATTERY SAFETY RULES
WAR NIN G
personal injury , and product damage due to a
short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids,
such as seawater , certain industrial chemicals,
and bleach or bleach-containing products, etc.,
can cause a short circuit.
-
dusty
Cat. no.: ...... M18 FMTIW2F12, M18 FMTIW2P12
Volts............................................................18V DC
RPM . . . . . . . . . . . . .
IPM .............................................................. 0-3100
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
Operating Temperature .................... -17°C to 51°C
3
service facility for a
®
Some dust creat ed by power sanding,
sawing, grinding,
To reduce the risk of fire,
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
Read operator's manual
Do not dispose of electric tools
together with household
material. Electric tools and electronic
equipment that have reached the end
of their life must
separately and returned
environmentally compatible recycling
facility.
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.

SPECIFICATIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
drilling, and other
waste
be collected
to an
. . . . . . . . . . . . . . . 0-2575