Using Your Blender - Hamilton Beach MultiBlend 58151-SC Manual

Using Your Blender

IMPORTANT: Your blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose blades. If jar or cutting blade assembly is damaged, do not use. Call our toll-
free customer service number to obtain replacement parts.
1
5
Push the desired speed button.
When using the PULSE buttons,
the blender will only run when the
button is held down.
2
6
BEFORE FIRST USE: After unpacking the blender, follow the instructions in
"Cleaning Your Blender."
3
WARNING
! Burn Hazard: When
blending hot liquids, remove
filler-cap of two-piece lid and
close the edge cover opening
intended for pouring. To prevent
possible burns: Do not exceed
the 3-cup (710-ml) level. Hot
liquids may push off two-piece lid
during blending; therefore, with
the protection of an oven mitt
or thick towel, place one hand on
top of the lid, keep exposed skin
away from the lid, and start
blending at lowest speed.
4
5