CEL-FI PRO Quick Start Manual

Cel-Fi PRO Set-up
For more information, videos, & support,
please visit cel-fi.com.
For Cel-Fi PRO to work correctly, use
1
your phone to find the best 3G, 4G or
Step
LTE signal. Typically, you will get the
best signal upstairs near a window.
Find the best cellular signal.
Optimize Coverage by moving the Coverage Unit.
The NU and CU communicate with each other wirelessly to provide the best signal improvement possible. As the
distance between the units is increased, the CU adjusts its coverage bubble to provide the ideal amount of coverage.
COVERAGE UNIT
NETWORK UNIT
Too Close
User Interface
On/Off Button
LCD Screen
for LCD Backlighting
2
Place the NU in the location where you
Step
get the best cellular signal.
Place the Network Unit
NETWORK UNIT
COVERAGE UNIT COVERAGE UNIT
Modest Coverage Good Coverage
NOTE:
Your device may require REGISTRATION
prior to use. If so, please refer to the
included Device Registration sheet
included with the unit.
Step
Place the Coverage Unit
(NU).
Optimal Coverage
from CU to NU
Best Coverage
Signal Strength
BEST
4-5 BARS
BETTER
2-3 BARS
OK
1 BAR
Place the CU in the location where
3
you need improved coverage.
Congratulations! Your Cel-Fi Smart
Signal Booster is now working.
(CU)
COVERAGE UNIT
COVERAGE UNIT
Too Far
.