Using The Adaptec Cd - Adaptec SCSI RAID 2100S Quick Start Manual

This booklet describes:
I How to view the documentation on CD-ROM
I Installing and configuring your hardware
I Installing Adaptec software
I How to access Storage Manager on ROM (SMOR)
I
Contacting Adaptec Technical Support

Using the Adaptec CD

The Adaptec SCSI RAID CD is a bootable media. You can use this CD
to configure disk arrays in a host system that does not yet have an
operating system installed. The CD-ROM drive must be attached to a
controller and host system that recognizes bootable CDs. Some systems
might require you to change the system BIOS configuration so that the
CD-ROM drive is used as a boot device.
When the CD is used as a boot source, an operating system is loaded
and then the Adaptec SCSI RAID installation utility starts. You will be
able to read the product documentation, install I
Manager, and create disks to use for driver installation when the
operating system being installed cannot use the CD-ROM as a source
for the files.
O drivers, run Storage
2
3