Table of Contents
Advertisement
3 If you are installing one internal SCSI device only, terminate
that SCSI device. If you have two or more internal SCSI devices,
terminate the device that will be connected to the end of the
cable.
For more information on termination, refer to the SCSI device's
documentation.
4 Mount each SCSI device in an available drive bay inside your
computer, as shown in the next figure. Refer to the
documentation for your computer and SCSI devices for
installation instructions.
Note: If space is limited inside your computer, you may
have difficulty connecting SCSI and power supply cables
to your SCSI devices once they're installed. Consider
completing these connections
installing the devices.
Connecting Internal SCSI Devices
(Step 5 on page
Internal SCSI device mounted
in the drive bay
8) before
7
Advertisement
Table of Contents
