Hook Tackle And Hook Block - Liftket B13 Operating Instructions Manual

Lubrication of the chain:
•
Lubricate the chain in an unloaded condition.
•
Apply lubricant to the shaded areas of the chain link.
•
The chain located in the chain box must also be lubricated.
•
Prior to repeated lubrication the chain must be cleaned.
•
You may vary the quantity of the lubricant and the frequency of lubrication as a function of the operating
conditions.
•
Lubricate the chain at least once every 3 months.
•
If necessary / depending on the operating conditions the lubrication intervals must be shortened.
•
Use a dry lubricant if the operating conditions are conducive to heave wear and tear (sand, emery, etc.).
Diagram No 37: Lubrication chain
As a function of the operating conditions we recommend the following lubricants for the lubrication of the chain:
Manufacturer
©
Fuchs
©
Klüber
©
Fuchs
©
Castrol
©
Fuchs
©
Klüber
©
Fuchs
©
Fuchs
©
Klüber
Table No. 11: Chain lubricants
11.3

Hook tackle and hook block

Under normal operating conditions the roller bearings of the hook and of the chain
NOTE sprocket require lubrication once around every 20,000 lifting cycles or once a year, or
more frequently under harsh operating conditions.
Lubricants recommended for lubricating the bearings:
Manufacturer
©
Fuchs
©
Fuchs
Table No. 12: Bearing lubricants
48
Side of the
load
Designation
Stabylan 2001
Klüberoil 4UH 1-1500
Ceplattyn 300
Optimol Viscogen KL300
Stabylan 5006
Klüberoil CA 1-460
CTP D 350
RENOLIT SO-GFB
Microlube GB 00
Designation
Renolit Duraplex EP3
Lagermeister LX EP2
Notes
Food industry
Dry lubricant