Table of Contents
Advertisement
USING THE POWER NUTRI™ CUP
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop
or table.
2 Add ingredients to the Power Nutri™
Cup. DO NOT add ingredients past the
MAX LIQUID line.
3 Place the Hybrid Edge™ Blades Assembly
on the top of the cup and turn clockwise
to seal.
10
ninjakitchen.co.uk
4 Turn the cup upside down and install
on the motor base by aligning the tabs
on the cup with the slots on the base.
Then, rotate cup clockwise until it clicks.
Once locked in place, the programs will
illuminate and the unit will be ready for
use.
5a If using an Auto-iQ® program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop.
6 Remove the cup from the motor base by
turning it anti-clockwise and then lifting
up.
7 Remove the blade assembly by twisting
anti-clockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the Spout Lid or
Storage Lid to cover. Exercise care when
handling the blade assembly, as the
blades are sharp.
8 To enjoy on the go, place the Spout Lid
or Storage Lid onto the cup and twist lid
clockwise until firmly sealed.
9 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
ninjakitchen.co.uk
ninjakitchen.co.uk
11
11
Advertisement
Table of Contents
