Sony Ericsson Z520a Working Instruction page 24

4. Orient the LCD sub-frame so that the LCD
assembly's cavity is toward you. and the reciever is
to the right.
5. Determine wether the two display cushions are
installed in the LCD sub-frame. If the display
cushions are not installed:
a. Obtain a display cushion and position it in
b. Apply pressure to the cushion so that a good
c. Obtain another display cushion and position it in
d. Apply pressure to the cushion so that a good
6. If the LCD sub-frame is being reused, remove any
adhesive residue left on the portion of the LCD sub-
frame that mates to the camera ring gasket on the
outer flip cover.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
location A so that a long side of the cushion is
against the side wall and a short side of the
cushion is against the rib that extends towards the
small display opening.
bond forms.
location B so that a long side of the cushion is
against the side wall and a short side of the
cushion starts at the location where there is no
radius between the side wall and the bottom of
the display cavity.
bond forms.
Step-by-Step Instructions
Working Instruction, Mechanical
24(113)