Sony Ericsson Z520a Working Instruction page 12

6. Once the tabs of the antenna cover are inside the
hinge concealing portion of the inner base cover,
rotate the flip assembly so that the hinge inserts into
the hinge covering portion of the inner base cover
and the arm of the hinge slides down over the two
screw bosses that protrude through the circuit board.
7. While holding the two halves of the phone together,
connect the main flex film to its connector on the
circuit board.
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
12(113)