Table of Contents
Advertisement
Caution:
device(s) from the MiniSCSI EPP while in
use, the adapter loses power and cannot rec-
ognize the device(s) when reconnected.
Reboot your computer in this case.
Connecting the Printer
Connect a standard parallel printer cable to the
MiniSCSI EPP printer passthrough connector if you
wish to simultaneously use a parallel printer with
your MiniSCSI EPP. No special configuration or
switching is needed to use your printer.
For U.S. Residents Only:
included in your kit to connect the MiniSCSI
EPP to your printer. This cable is shielded to
comply with FCC-mandated requirements
for a Class B computing device. Use of any
other printer cable may result in noncompli-
ance with FCC shielding requirements and
undesirable electronic interference with
other devices.
The printer port on the MiniSCSI EPP functions only
while it is powered up; if you disconnect or turn
the connected SCSI device, the printer passthrough
port on the adapter cannot function.
Completing the Installation
1
Turn
ON
2
Load the software as explained in the Software
User Guide.
In most cases your PC, MiniSCSI EPP, and peripher-
als are now ready to use.
6
Troubleshooting
If you have a problem during installation, check the
items below. Be sure to read the Troubleshooting sec-
tion in the Software User Guide for other remedies.
If you disconnect your SCSI
the power for the PC and device(s).
Use the printer cable
6
OFF
Advertisement
Table of Contents
