Unix; Sco Openserver 5.0; Adding Nic Drivers - Adaptec ANA-6901 User Manual

UNIX

This chapter describes the installation of Unix drivers. The drivers
are located on Diskette 1.

SCO OpenServer 5.0

This section describes how to install LAN drivers for SCO
OpenServer 5.0.

Adding NIC Drivers

1
Power
OFF
mastering slot.
2
Boot the system with SCO OpenServer 5.0 and login as the root
user.
3
Double-click the Software Manager Icon on the desktop.
4
From the menu, select Software and then Install New.
5
Press Continue.
6
Insert Driver Diskette 1 in drive A and click Continue.
7
Select Full installation.
8
After scrolling through the readme , click OK to complete the
installation.
9
Exit the Software Manager by clicking Host and then Exit.
your system and install the adapter in a PCI bus
6
6-1