Table of Contents

Advertisement

approximately. If this is the case, we recommend that you deactivate the
rain sensor and turn on the wipers, if necessary, in continuous mode.
Important note
If this occurs, contact the F
possible.

Lighting

External lights
The external lights and turn indicators only work when the instrument
panel has been activated (KEY-ON).
Every time the instrument panel is turned on (KEY-ON), the external
lights are switched on in automatic mode (the AUTO symbol becomes
green) and the daylight running lights (DRL), low beams and number
plate lights are turned on and off automatically according to the ambient
light detected by the twilight sensor.
Light switch
ABOUT YOUR VEHICLE
116
S
N
as soon as
ERRARI
ERVICE
ETWORK
A
The light switch A, located on the dashboard to the left of the steering
wheel, indicates the operating mode of the external lights.
When the AUTO symbol is green: the external lights are switched on and
off automatically according to the ambient light detected by the twilight
sensor. If the twilight sensor detects low ambient light conditions, the
low beams are switched on automatically. If the ambient light conditions
are sufficient, the lower beams are switched off and the daylight running
lights (DRL) are turned on.
To go to manual mode for switching the external lights on and off, push
lever
A
once towards the dashboard. The AUTO symbol will turn white
By switching to manual mode, the driver can perform two different
operations:
If the low beams were on in AUTO mode, when switching to manual
mode they are turned off and the daytime running lights (DRL)
come on.
If the low beams were off in AUTO mode, when switching to manual
mode they are turned on and the daytime running lights (DRL) are
switched off.
B
High beams

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents