Etup; Ac Power - Venue Tetra Beam Manual

This fixture runs on 100~240 VAC, 50/60 Hz. Before powering on the unit, make sure the line voltage is
within the range of accepted voltages.
To determine the power requirements for a particular fixture, see the label affixed to the bottom of the
fix-ture or refer to the fixture's specifications chart. A fixture's listed current rating indicates its average
current draw under normal conditions.
s connect the fixtur
s connect the fixtur
The includes a metal bracket
Please see the "Technical Specifications" section of this manual for a detailed weight listing.
may be done with a
can fit a 13mm screw or bolt. When rigging, consider routine maintenance and control panel access.
•
• nsure that cables are neatly organized and sufficient space is
provided the fixture.
• Safety cables must always be used, in conjunction with the included safety loop.

AC Power

Mounting Orientation
hanging upside-dow
Mounting
e sure that the
nut and bolt or a hanging clamp (not included). The hole in each bracket
er connect the fixtur
structure can support the weight of the fixture.
ount the fixture securely. This
Venue Tetra Beam Manual