License Plate Light; Tail Light - Triumph Rocket 3 R Owner's Handbook Manual

Bulb Turn Signal Lights
2
celc_2
1. Indicator lens
2. Screw
To replace the turn signal light bulb:
• The lens on each signal light is held
in place by a screw located in the
body of the light.
• Loosen the signal lens screw.
• Remove the lens to gain access to
the bulb for replacement.
• Replace the bulb.
• Re-install the lens making sure that
the locating tang is correctly aligned
to the signal body.
• Tighten the signal lens screw to
9 lbf in (1 Nm).

License Plate Light

The license plate light unit is a sealed,
maintenance free LED unit.
1

Tail Light

The tail light
maintenance free LED unit.
Maintenance
unit is a sealed,
157