Download Print this page
MELICONI SPEEDY 2 Instruction Booklet
MELICONI SPEEDY 2 Instruction Booklet

MELICONI SPEEDY 2 Instruction Booklet

Simplified universal remote control

Advertisement

Quick Links

GB
This simplified universal remote control is used for all the main functions of 2 appliances at the same
time, a TV and a VCR (or a DVD) of the brands listed at the back.
Insert the batteries and program your remote control before using it.
To select the next programme or
to turn ON your TV
Press them together to turn ON
your TV on programme 1
To select an external terminal
Record/Eject DVD
Play
Rewind
Stop
Your remote control requires 2 new AAA/LR03 alkaline batteries. Insert the batteries as shown:
• Batteries must be changed once a year.
• Change the batteries if the light indicator starts to flash during use;
batteries are low.
• When removing batteries, insert the new ones within 5 minutes or you
may have to reprogram your remote control.
• Make a note of the codes for your TV and VCR/DVD on the adhesive
label inside the battery compartment cover. This note will be handy if
you have to reprogram your remote control.
Read these instructions carefully before programming your remote control!
To use the remote control with your appliances, you must first program
below. You can also visit our Internet site www.meliconi.it to have access to interactive
instructions for easier and faster remote control programming.
4
Thank you for choosing Meliconi.
Keep your Instructions Booklet for future reference.
USING THE KEYS AND FUNCTIONS
FITTING THE BATTERIES
SET-UP
ON/OFF to turn OFF your TV
and, in some cases, to turn
ON your TV
Control the volume
using
To select the previous programme
or to turn ON your TV
Mute key
Videorecorder/DVD
ON/OFF key
Fast forward
Pause
as described
Speedy 2
+
-
/

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPEEDY 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for MELICONI SPEEDY 2

  • Page 1 Read these instructions carefully before programming your remote control! To use the remote control with your appliances, you must first program as described Speedy 2 below. You can also visit our Internet site www.meliconi.it to have access to interactive instructions for easier and faster remote control programming.
  • Page 2 • if the code search list is completed. In this case, visit www.meliconi.it PROGRAMMED CODE NOTING When you have programmed Meliconi Speedy 2, note down the TV and VCR or DVD codes on the label in the battery compartment cover.
  • Page 3 TV or VCR/DVD. At the end, three flashes indicate that the code has been saved correctly. If not, try the code entry procedure again from point 1. USING YOUR REMOTE CONTROL Once you have programmed Speedy 2, you can turn ON your TV in three ways: • Press • Press •...