Keep this booklet for future reference The SPEEDY 210 Combo remote control is designed to command a TV and a DECODER (satellite or digital terrestrial). SPEEDY 210 Combo is a simplified remote control; it provides ONLY the functions on the keypad.
Page 3
(only to be performed if you know the specific code to be set) If you want to use SPEEDY 210 Combo to control 2 devices at the same time (TV + DECODER) set firstly the code for the TV and then the code for the DECODER. To control just one device, enter only the desired code.
Page 4
CAUTION: the search procedure could take several minutes. If you want to use SPEEDY 210 Combo to control 2 devices at the same time (TV + DECODER) firstly search the code for the TV and then the code for the DECODER. To control one single device only do what interests.
Page 5
BUTTONS AND FUNCTIONS USE The functions of the buttons described below are available only if they are also present on the original device IMPORTANT: sometimes, to switch on the TV, you must press the ON TV button. TV ON - sometimes needed to switch ON the TV Select the next program Indicator light...
Also try entering the code used to set the remote control again. ● IF SOME FUNCTIONS ARE NOT AVAILABLE ON THE REMOTE CONTROL Usually the MELICONI remote control makes available only the present functions on his keyboard, provided they are available also on the original remote control.
IMPORTANT! When contacting technical support it is INDISPENSABLE that you communicate the BRAND and MODEL of the device that you want to control and which MELICONI remote control you are using. To contact an operator to call number +39 02 66012766 or send an e-mail to: telecomandi@meliconi.com...
Need help?
Do you have a question about the SPEEDY 210 Combo and is the answer not in the manual?
Questions and answers