Related Manuals for MELICONI Smart4
Summary of Contents for MELICONI Smart4
- Page 1 WARNING Having correctly activated your MELICONI remote, if a problem occurs when using it in MOUSE / KEYPAD mode, consult the SMART4FAQ section at the following address: www.meliconi.com/smart4faq FIG. 1 USB DONGLE FIG. 2...
- Page 2 FIG. 3 ON / OFF to turn the device on and off POWER To select the device For selecting an to be controlled external input source LEARN - function to capture signals Numeric keypad MENU control Audio ON-OFF Arrows used to move around the MENU Audio + Audio –...
- Page 3 ID SAT / ZODIAC PIONEER TOSHIBA COBRA OTHER BRANDS Meliconi SpA, Via Minghetti 10 - 40057 Cadriano di Granarolo Emilia, (BO) Italy web: www.meliconi.com email: telecomandi@meliconi.com The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the product must be collected separately from other waste.
-
Page 4: Inserting The Batteries
So it depends on the device to which it is connected whether all (or part) of the corresponding functions are available. Thanks to its built-in gyroscope, when the remote is moved through the air Smart4 interprets its movements as if it were a mouse. - Page 5 WARNING: For this mode refer only to the functions indicated in BLUE color shown in Figure 3. The Smart4 remote control is designed to command up to 4 different devices: TV - STB (SKY / satellite decoder / digital terrestrial decoder) - DVD (Dvd, Blu Ray, PVR, Media Center and VCR) - AUX (other audio video equipments).
- Page 6 After entering the code stand in front of the device already turned on press ON/OFF button on the MELICONI remote control. If the device does NOT switch off, set the next code in the SMS list on the remote control and try switching the device off again.
- Page 7 G) Three final flashes indicate that the operation has been completed successfully. ADDITIONAL CHECK Check that the MELICONI remote control operates your device also with the other main functions; if it does not, REPEAT the procedure from step B using the same brand number.
-
Page 8: Learn Function
• Check you are operating in the required mode by pressing the corresponding device selection button on the MELICONI remote control for an instant. (example: • Position the original remote control in front of the MELICONI remote control so the areas which emit the infrared signals are opposite each other at a distance of approximately 5 cm. -
Page 9: Memo Function
If necessary it is possible to completely reset the remote control and bring it back to the initial conditions. WARNING! All user settings will be lost. Operate as follows: • Press and hold on the MELICONI remote control for at least 6 seconds one of the selection buttons corresponding to the device you wish to control. (example: •... -
Page 10: Additional Functions
Use the online tool FIND THE CODE FOR YOUR REMOTE and continue until you see the list matching buttons between the original remote control and the MELICONI remote control. After identified the function you want to achieve, note the 3-digit number in amber to it combined and operate as follows: •... -
Page 11: Troubleshooting
If some of the MAIN functions are not available, you are probably using an incorrect code. Find and set a more suitable code as described earlier. Some secondary functions are not present on the MELICONI remote control keypad, to obtained them proceed as described in chapter ADDITIONAL FUNCTIONS. - Page 12 Low Bat function Low battery indication available Simplified EU Declaration of Conformity The manufacturer, Meliconi SpA, declares that the type of radio device, Combo RF-IR Smart4 Remote Control, complies with the essential requirements that transpose the Directives RED 2014/53/EU and 2011/65/EU (RoHS).
Need help?
Do you have a question about the Smart4 and is the answer not in the manual?
Questions and answers