Advertisement
Lucca SC51
Please read these instructions carefully and retain them
for future reference to ensure that the product is used
Space Copenhagen
correctly. For your own safety, please study each step of
this instruction manual first. &Tradition is not responsible
2020
for any faults or damages caused by not following these in-
structions correctly. Do not modify this product in any way.
Contents
A
A Lucca SC51 lamp
B Micro USB charging cable
Safety precautions
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- Keep product well out of children's reach.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable within reach of small children or
B
anywhere with a risk of falling over it.
Cleaning instructions
- Wipe surface of the glass shade with a soft, damp sponge
or cloth, and wipe immediately with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool,
scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit,
terpentine, household glass cleaner or cellulose thinners.
Important
&Tradition will not accept any responsibility for any
accidents or injuries that occurs due to the use of incorrect
USB cable input.
The battery must be removed from the luminaire before it
is scrapped; the appliance must be disconnected from the
Input 5.0V
1A USB cable
supply mains when removing the battery; the battery must
Output 3,2 Watt dimmable LED bulb
be disposed safely.
Charging time: 8 hours
Operating time in highest light setting: 12 hours
For furhter information or inquiry, please do not hesitate
to contact &Tradition by mail on:
info@andtradition.com.
Step 1
The lamp is delivered fully assembled.
Step 2
Before use, the battery in the lamp needs to be charged.
Plug in the micro USB cable into the USB port in the
bottom of the base of the lamp. Connect the USB cable to
a power supply.
Step 3
When charging the lamp a red LED light will appear next
to the USB port. When the lamp is fully charged the red
LED light will turn green.
Be aware to close the lid to the USB port properly after
charging to ensure no water gets inside.
Advertisement
