Download Print this page

&Tradition FLOWERPOT VP4 User Instructions

Advertisement

Quick Links

C
Maximum 100 W.
Maximum 23 W.
Tungsten E27 bulb.
Low Energy E27 bulb.
Not included
Not included
U S E R I N S T R U C T I O N S
FL OWERP OT
Congratulations on choosing this original Flowerpot VP4 lamp, designed
in 1968 by Verner Panton. We hope you will enjoy using this lamp and
follow these instructions to ensure correct use. If you have any questions
or comments, please do not hesitate to contact us by mail on:
info@andtradition.com
C O N T E N T S
A - Shade
B - Undershade & base
C - Shade stand with 3 meter fabric cord
Please read these instructions carefully and retain them for future reference to ensure that
the lamp is correctly installed should it be moved or sold. For your own safety, please
study each step of this instruction manual before you commence installation. &tradition
A
are not responsible for any faults or damages caused by not following these instructions
correctly. Do not modify this lamp in any way.
I N S TA L L AT I O N S U G G E S T I O N S
The Flowerpot VP4 table lamp can be used as a stand alone lighting source in combination
B
with the other lamps in the FlowerPot series. Place it on an office desk, cabinet or bedside
table. Different colours can also be combined. Visit our website for more inspiration:
www.andtradition.com
S A F E T Y P R E CA U T I O N S
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children's reach.
- The lamp is only intended for interior use.
- Lamp exterior gets hot after prolonged use.
- Do not attempt installation of product if you are not competent to do so yourself.
- Consult a professionally qualified electrician if in any doubt.
- Do not place the cable in reach of small children or anywhere there is a risk of
falling over it.
C L E A N I N G I N S T R U C T I O N S
- Wipe surface of lamp shade with a soft, damp sponge or cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or
stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household
glass cleaner or cellulose thinners.
- Only wipe the inside of the shade with a soft, damp cloth or feather duster.
V E R N E R PA N T O N
B Y
1968
VP4

Advertisement

loading

Summary of Contents for &Tradition FLOWERPOT VP4

  • Page 1 I N S TA L L AT I O N S U G G E S T I O N S The Flowerpot VP4 table lamp can be used as a stand alone lighting source in combination with the other lamps in the FlowerPot series. Place it on an office desk, cabinet or bedside table.
  • Page 2 S T E P 1 To adjust the angle of the light, grip the top of the shade while supporting the base with the other hand. Slide the top of the shade up or down to set the desired angle. It is best to set the angle before turning the lamp on as the shade gets hot when the lamp is in use for longer periods of time.