Advertisement
Quick Links
Instructions
Bellevue AJ11
Arne Jacobsen
1929
Congratulations on your new Bellevue lamp, designed in
1929 by Arne Jacobsen. We hope you will enjoy using this
product and follow these instructions to ensure correct
installation. If you have any questions or comments,
please do not hesitate to contact us by mail on:
info@andtradition.com
Advertisement
Summary of Contents for &Tradition Bellevue AJ11
- Page 1 Instructions Bellevue AJ11 Arne Jacobsen 1929 Congratulations on your new Bellevue lamp, designed in 1929 by Arne Jacobsen. We hope you will enjoy using this product and follow these instructions to ensure correct installation. If you have any questions or comments, please do not hesitate to contact us by mail on: info@andtradition.com...
- Page 2 Bellevue AJ11 Please read these instructions carefully and retain them for future reference to ensure that the product is used Arne Jacobsen correctly. For your own safety, please study each step of this instruction manual first. &Tradition is not responsible...
- Page 3 Please note that the table top which the lamp is to be installed must be a minimum of 20 mm thick in order for the lamp to be securely installed. Step 1 Find the desired location for the lamp on the table top and mark the middle using a pencil.
- Page 4 Step 4 Tighten the nut by turning it counter-clockwise using a wrench. Step 5 Install the light bulb. Step 6 Use the flexible swan-neck to set the shade in a desired angle. It is best to set the angle before turning on the lamp since the shade will turn warm when the lamp is on.