&Tradition JOURNEY SHY1 User Instructions

A
U S E R I N S T R U C T I O N S
J O URNEY
S I G N E H YT T E
B Y
2018
Congratulations with your new Journey lamp, designed in 2018 by Signe
Hytte. We hope you will enjoy using this product and follow these
instructions to ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by mail on:
info@andtradition.com
C O N T E N T S
A - Lamp fitted with a 2 meter cord with plug
Please read these instructions carefully and retain them for future reference to ensure
that the product is correctly installed should it be moved or sold. For your own safety,
please study each step of this instruction manual before you commence installation.
&tradition are not responsible for any faults or damages caused by not following these
instructions correctly. Do not modify this product in any way.
TO O L S N E E D E D
This lamp can be used both as a table lamp and as a wall lamp. If you choose to install
it as a wall lamp the following tools are needed.
- Correct screws and plugs for the specific wall type, where the lamp is to be installed
- Electric drill
- Screwdriver
S A F E T Y P R E CA U T I O N S
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children's reach.
- The product is only intended for interior use.
- Do not attempt installation of product if you are not competent to do so yourself.
- Consult a professionally qualified electrician if in any doubt.
- Disconnect the electricity supply at the fuse box, before commencing work.
- Do not place the cable within reach of small children or anywhere where there is a risk
of falling over it.
C L E A N I N G I N S T R U C T I O N S
- Wipe surface of lamp with a soft, damp sponge or cloth, and wipe immediately after
with a dry cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
- Never use strong cleaning agents such as white spirit, terpentine, household glass
cleaner or cellulose thinners.
- Mirror color: Cleaning of stainless steel should be done only by using a cleaning detergent
specifically for stainless steel. Follow the instructions on the packaging. Cleaning agents
not developed specifically for stainless steel may permanently damage the surface of the
stainless steel and should never be used. For daily care, please only use a dry soft cloth
to clean.
SHY1