Advertisement
Step 3
Attach pole mounting bracket 1 to the 4-1/2" diameter pole using 1/2-
13 U-bolts. Use the azimuth adjust U-bolt as a rest, face the bracket
towards the desired antenna direction and secure the 1/2-13 U-bolts
with the appropriate hardware. Tighten until the bracket is snug to pole
- do not fully tighten at this time.
1
Step 4
Install bushing 9 into the hole of the azimuth adjust rod 5 and between the two ribs on the pole
mounting bracket 1 with 3/8-16 x 2-1/2 long hex head bolt. Secure with stainless steel flat, split
lock washer and silicon bronze hex nut. Do not fully tighten at this time.
1
5
9
FP100780-1_revG.docx
Page 7 of 11
Advertisement
