Table of Contents
Advertisement
Chapter 2
Device Overview
be 10 MHz ± 5.63 ppb after 375 days of operation. Calibration does not
affect the drift in frequency; it only changes the stable frequency.
Calibration
When you are ready to calibrate your device to correct for drift in
frequency, refer to the NI 6601/6602 Calibration Procedure or the
NI 6608 Timing I/O Device Calibration Procedure. You can calibrate
these devices in Traditional NI-DAQ (Legacy) only.
Register-Level Programming Information
NI is not liable for any damage or injury that results from register-level
Caution
programming the TIO Series devices.
For information about programming the NI 660x devices at the register
level, refer to the NI 660X Register-Level Programmer Manual.
The National Instruments Measurement Hardware Driver Development Kit
(MHDDK) provides development tools and a register-level programming
interface for NI data acquisition hardware. The MHDDK provides access
to the full register map of each device and offers examples for completing
common measurement and control functions. The MHDDK works with
TIO Series digital I/O and counter/timer I/O devices. Refer to
more information.
NI 660x User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2-12
for
ni.com
ni.com
Advertisement
Table of Contents
