Setting; Setting Address Of Fcu Kit And Installation Option; Procedure Of Option Setting - Samsung DVM Installation Manual

Setting address of FCU KIT and installation option

Procedure of option setting

y Setting address of FCU KIT and installation option is set by remote controller option. It is
y
also possible by wired remote controller and S-NET pro2.
y Remote controller receiver of wireless remote controller is included in FCU KIT PBA.
y
Entering mode for
option setting
[Temp.+] button
[Temp.-] button
Step 1. Entering setting mode
1 Remove batteries from the remote controller.
2 While pressing and holding the [Temp +] and [Temp -] buttons, insert the batteries.
3 Check whether you enter the option setting stage
28
OPTION FCU KIT_IBIM_06104A-00_EN.indd 28

SETTING

Option setting mode
[Mode] button
[Fan ∧ ] button
[Fan ∨ ] button
.
2016-03-16 오후 2:44:43