Dust Free BIO-FIGHTER Ultra-Flex 1S Installation & Operation Manual

GENERAL
This product is designed to help disinfect the inter-
nal surfaces of heating, ventilation, and air
conditioning systems where the light shines.
Bacteria and viruses that are in the air stream that
pass through the system can also be reduced. The
result is an improved level of indoor air quality for
occupants and improved system hygiene.
The Bio-Fighter® emits ultraviolet(UV -C) radiation
at a frequency of 254 nanometers, which has been
proven effective in damaging the DNA of
microorganisms such as viruses, bacteria,
yeast and molds. This process either destroys
the microorganism or neutralizes its ability to
reproduce.
©2021 Dust Free® • All rights reserved. • 212972-00 Rev. 2C 2/21
STD
Model 1S14 #09000
Model 1S16 #09001
Model 1S20 #09002
STD
Model 2S14 #09006
Model 2S16 #09007
Model 2S20 #09008
BIO-FIGHTER
Ultraviolet Light Systems
Installation & Operation Manual
O3
#09003
#09004 FEATURES
#09005
• Reduces or prevents mold growth on HVAC
coils, allowing them to operate at peak
efficiency where the light shines. Also
significantly reduces bacteria, viruses, fungi,
and yeasts on surfaces exposed to the
UV-C energy.
• Compact chassis design.
• Remote-mount lamp configuration.
• 6-ft remote lamp cables.
INCLUDED INSIDE BOX
• Multi-input hvoltage electronic ballast.
• Bio-Fighter® Ultra-Flex UV-C system
O3
#09009
• Viewport(s)
#09010
#09011
• Installation hardware
• Installation & operation manual
• UV warning label for duct
• Registration card
TOOLS REQUIRED FOR INSTALLATION
• Electric drill
• Phillips screw bit or screwdriver
• 1/2" drill bit
• 1" drill bit or holecutter
• Eye protection
BEFORE INSTALLING
• Read all instructions carefully. Failure to do
so could damage the equipment or cause
harm to yourself or others.
• Acknowledge all warnings.
• Only qualified technicians should perform
the installation.
Ultra-Flex 1S and 2S
®