Kenwood KMM-123Y Instruction Manual page 20

INSTALLATION/CONNECTION
Wiring connection
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White
: Power control (12 V
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1 Purple ]
: Rear speaker (right)
B2 Purple/black [
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
B6 White/black [
B7 Green ]
: Rear speaker (left)
B8 Green/black [
Fuse (10 A)
Ignition wire (Red)
Unit
Battery wire (Yellow)
Yellow (Battery wire)
Red (Ignition wire)
350 mA)
Yellow (A4)
ISO
connectors
Output
terminals
If no connections are made, do not let the wire come
out from the tab.
Light blue/yellow
STEERING WHEEL
REMOTE INPUT
(Steering remote REMOTE CONT
control wire)
Blue/White
ANT CONT
(Power control wire/
Antenna control wire)
Red (A7)
Brown
(Mute control wire)
Autogoods "130"
When connecting to an
external amplifier, connect its
ground wire to the car's chassis
to avoid damaging the unit.
Antenna terminal
To the steering wheel
remote control adapter
To the power control
terminal when using the
P. CONT
optional power amplifier
or to the antenna control
terminal in the vehicle
To the terminal that
MUTE
is grounded when the
telephone rings or during
conversation ( 13)
(To connect the Kenwood
navigation system, refer
your navigations manual.)
Part list for
installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
17
ENGLISH