Tel: +47 69 17 99 99 Fax: +47 69 17 99 89 E.mail: office@norselight.no We would also like to use this opportunity to thank you for choosing Norselight as your supplier of marine searchlights. Guaranty The guarantee is only valid against production faults. It do not cover damage caused by transportation, damage due to disregard of this technical Manual or adverse external effects.
Page 3
6500201 Rev - SH R50 Technical Manual for searchlight SH 260 R50 250W SH 310 R50 500W SH 470 R50 1000W SH 480 R50 2000W 3000W 24V DC 115V AC 230V AC This manual belongs to the product Serie no.: ______________ Controlled by: ______________ Date:...
6500201 Rev - SH R50 General description Searchlight The searchlights are SH 260-310-470-480 R50 made from toughened glass, seawater resistant aluminium, welded and finished with white powder coat. The lamp housing basically contains a 250W, 500W, 1000W, 2000W or a 3000W lamp, a glass-reflector covered with silver coding and a focus-motor for adjustment of the Light beam.
Page 6
6500201 Rev - SH R50 Main and Slave Operation Panel...
Control panels both hard wired and wireless, are fitted into a standard solution. Features and Benefits: • Wireless receiver for SCS wireless Bus • Bolt-on to Norselight`s network of searchlights • Die-Cast Aluminium, Compact and new design • Based on TCP/IP technology •...
6500201 Rev - SH R50 Main Control Panel position indicator versus searchlight position: In accordance to MSC/Circ. 982 Pos 5.5.1 “Movement of Controllers” and 5.5.2 “Corresponding Movements “ The position indicator on the Main Control Panel indicates the position of the searchlight. 0o position on the panel indicates that the searchlight is positioned straight forward compared to the searchlight 0o position.
6500201 Rev - SH R50 Technical data Halogen Searchlight Properties Value Searchlight SH 260 SH 310 SH 470 SH 480 Dimension: Height: 835 mm 890 mm 1040 mm Width: 423 mm 470 mm 615 mm Weight on searchlight: 35,5 kg 36,5 kg 45,5 kg 49,5 kg...
6500201 Rev - SH R50 Interface RJ45 port 10/100 LAN cable CAT5e - CAT7 twisted (568b) Power Requirements Power input: 24VDC (18-30VDC) Power consumption: <3.5W Physical Characteristics Casing: IP22 protection Dimensions(WxHxD): 147x160x43,4 mm (5.8x6.3x1.7 in) Weight: 500g (1.1 pound) Installation: Table mounting from front Environmental Limits Operating Temperature: -15 to 50°C(5 to 120°F) Ambient Relative Humidity: 0 to 95% (non-condensing)
6500201 Rev - SH R50 Network Wireless connection through Access Point Interface Standard: IEEE 802.11b Frequency: 2.4 GHz Data Rate: Up to 11 Mbps with automatic fallback Modulation: CCK (11/5 Mbps), DQPSK (2 Mbps), DBPSK (1Mbps) Transmit Power: 16 dBm typical Receive sensitivity: –...
Page 13
6500201 Rev - SH R50 IEEE802.1p Store and forward switching mode MAC Address Table Size Network Chain and star network topology. Service Diagnostics: LEDs(power, link status, port rate,) Port priority: QoS for 5th port (default high priority) Current over-load protection: Yes(AC220V) Reverse polarity power connection protection: Yes Broadcast storm protection: Yes Interface...
6500201 Rev - SH R50 Access Point, High Sensitive Receiver for Wireless Operation Panel REGULATORY/ COMPLIANCE INFORMATION Wireless Approvals FCC, IC, CE RoHs Compliance IP/NEMA Compliance IP67/ NEMA 6 DIAMETER RANGE PERFORMANCE 11Mbps 200m 5.5Mbps 400m 2Mbps 800m 1Mbps 1600m RADIO OPERATING Frequency 2412-2464 MHz...
6500201 Rev - SH R50 Installation Mechanical installation • The searchlight must be mounted on a horizontal surface using 4 stainless screws. • The Main/Slave Operation Panel and the Switch is designed for installation in indoor applications. • The Access Point is designed for out side installation. Electric installation •...
6500201 Rev - SH R50 • Indication level of Dim-light intensity. • Indication level on vertical and horizontal speed. • End stop indication T +/-180 • Alarm indication A, when stop occurs before end stop. Searchlight selection: • Allow you to choose the searchlight you want to use, if there is more than one searchlight available. Allow max.
6500201 Rev - SH R50 Note: If the lamp is not removed when these symptoms appears, it might cause damaging of other components. USE eyeprotection! Procedure: 1. Cut the main power to the searchlight. 2. Before replacing the lamp, disconnect the luminaire from the power supply. 3.
6500201 Rev - SH R50 Switch BUS dimensions. Fits for 5 LAN cable entry for RJ45 plug (KEIN1005S-5T) or 1 one full-duplex fiber port of 100Base-FX, single mode or multimode and 4 LAN cable entries (KEIN1005-1S (M)-4T). Look in the manual for KEIN1005 for more details.
Page 35
6500201 Rev - SH R50 All installation cables enters from the right side looking directly into the Junction Box through 2x M20, M25 and M32 as explained in earlier dimension drawing. For LAN connection it is recommended to use either WAGO connecting adapter to RJ45 with termination points up to 1.5mm or WAGO connecting plug RJ45.
6500201 Rev - SH R50 Reclamation or trouble shooting The customer Service department of GLAMOX Production GmbH & Co. KG will be pleased to help you when ordering spare parts, for maintenance and repair works as well as in case of problems and questions.