This commitment to quality and expertise provides the foundation for Norselight to be possibly the world’s leading supplier of maritime lighting. However, in order to stay in front, Norselight would very much appreciate all comments that you may have regarding our quality products or services.
1.0 General description: Searchlight The R60 searchlights SH 310, SH 470 and SH 480: are made from seawater resistant aluminium, welded and fi nished with white powder coat. The forks are made of stainless steel. • The lamp housing contains one lamp, ignitor, silverplated glass-refl ector ,hardened frontglass, and a focus-motor for adjustment of the light beam.
1.1 Options Software: -Focus indicator -Panel built in box or cabinet Hardware: -Other RAL colours -Upside down mounting -Pedestal standard and custom sizes -Special cable glands on request...
2.0 Technical data and dimensions General specifi cations searchlight unit: Technical data – all SH models: IP classifi cation Maximum ambient temperature (°C) Minimum ambient temperature (°C) Horizontal movement 360º Vertical movement -27° / +25º Colour RAL 9016 Forks stainless steel Article no: Model Watt...
2.1 Overall Searchlight dimensions & electrical cable dimensions Product SH 310 R60 BUS 1000W SH 470 R60 BUS 2000W 1040 SH 480 R60 BUS 3000W 1040 Measurments in mm...
3.3 Installation, software settings First start-up and after power loss When all cabling and mechanical installation is done turn on the power. With every power loss of the searchlight, always starts an inifi alization. Be sure the searchlight can move 360° horizontal and +/-30 °...
3.4 Hardware settings Start in Home menu Select each searchlight in the home menu Select how the searchlight is installed with Select all wanted searchligts in the system reference of the 0-point of the installation Example. The front of the motorhouse is in After selection the same direction as the bow of a ship.
3.5 Slave panel Connect the wires according to drawing E-R60-027 It is possible to connect unlimited slave pan- els. 3.Settings for the slave panel can be selected: Reverse direction for both horizontal and vertical direction Speed for horizontal and vertical movement Enable panel on/off...
3.6 Settings / Joystick The searchlight can be operated from 4 different types joysticks. 1. Software joystick in the touch-screen main menu. Settings for the joystick described in pos. 5 2. Hardware joystick on the main panel. The joystick controls the selected searchlight in the main menu Settings for the joystick described in pos.
4.0 Software userguide Menu for controlling all basic searchlight functions and position feedback. 1. Help menu page 19 2. Information about searchlight signals, 3. Settings for the searchlight 4. Home menu page 17 5. Move the SL to Home1 position settings, page 18 6.
4.1 Home menu Press the Home button for Home menu The panel can be dimmed in 32 levels in the pop-up menu Searchlight selector. Up to 9 searchlights can be controlled See page See page Input/Output information on panel PLC. Yellow colour indicates logic On.
4.2 Settings / Sector limits / Sweep / Home The searchlight movements can be limited by setting a sector for horizontal and vertical movements. The settings will have the same function as a mechanical stop unless for the reset/init- tializing routine. Main menu / Settings / Hardware Installation / Searchlight limits Do not exceed -180 and 180 degrees.
4.4 Alarm handling Home menu Indicator for alarm 1. Alarmtext Searchlight nr. and alarmtext. 25 different alarms for each searchlight 2. Alarm status: Red= active alarm unacknowledged Green= active alarm unacnowledged Yellow= not active alarm acknowledged 3. Acknowledge and delete unactive alarms 4.
Manual or adverse external effects. Guarantee regarding the bulb, please look at the guarantee papers following the bulb. This must be fi lled in and returned to Glamox ASA BU Norselight. Use safety equipment, face cover and gloves at all times ! Cut the power to the searhlight and the power-supply before working inside the drum.
5.2 Lamp replacement 1. Cut the main power to the searchlight. 2. Make sure the lamp has cooled down before opening the lamphouse 3. Remove the lamp and replace it with a new without touching the glass part 4. Panel settings Alarm-limit can be changed .
5.3 Troubleshooting Searchlight don t move on horizontal or vertical: In case of Alarm Horizontal blocked or Vertical blocked, check that cables is not restricting movement. In case of too much ice around the forks it can be blocked. Sensor fault, check I/O-signals on the panel searchlight. The light does not turn on Check on the lamp that get the ignition spark Check that the power supply is on...
3. Battery replacement in the panel: Pull the white connector Connect new battery from the board. with the white-coded Dispose battery connectors on the board professionally 5.5 Battery replacement in the searchlight Pull the white connector Connect new battery from the board. with the white-coded Dispose battery connectors on the board...