Table of Contents
Advertisement
Quick Links
After removing the parts from packaging, inspect them to ensure
that no damage has occurred. Please report any damage
immediately to your authorized Archgard dealer.
Please review and understand the information in this manual in
full PRIOR to beginning your installation.
INSTALLER:
LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER:
RETAIN THIS MANUAL FOR FUTURE REFERENCE
ARCHGARD FIREPLACE PRODUCTS
7116 Beatty Drive
Mission, BC V2V 6B4 Canada
IMPORTANT
INSTALLATION MANUAL
50-DVTE36CN-1 & 62-DVTE46CN-1
(see the Installation, Operation, and Maintenance Manual
included with the fireplace)
WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.
Do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance
•
Do not touch any electrical switch; do not use any phone in
your building
•
Immediately call your gas supplier from a neighbors phone.
•
Follow the gas suppliers instructions
•
If you can not reach your gas supplier, call the fire
department
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
Only kits supplied by the manufacturer may be used.
English and French Installation Manuals available through
your local dealer or visit our website at:
www.archgard.com
Les manuels d'installation en anglais et en français son
.
disponibles chez votre détaillant local ou en visitant notre
site web: www.archgard.com
Burner Media
For installation in
200-0282-02
May 30, 2024
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Archgard Burner Media
Summary of Contents for Archgard Burner Media
- Page 1 Do not touch any electrical switch; do not use any phone in that no damage has occurred. Please report any damage your building immediately to your authorized Archgard dealer. • Immediately call your gas supplier from a neighbors phone. •...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1.0 Important Information 2.0 Burner Media 2.1 Fire Beads 2.2 Black Embers 2.3 River Rocks 3.0 Silhouette Log Set 4.0 Premium Log Sets 4.1 Overview of Log Sets 4.2 Installing Log Set A Only: 50-DVTE36CN-1 4.3 Installing Log Set A Only: 62-DVTE46CN-1... -
Page 3: Important Information
* See the Installation, Operation, and Maintenance Manual included with the fireplace. CAUTION: DO NOT block pilot opening with burner media. NOTE: Improper placement of burner media may cause soot accumulation on the internal parts and glass. This is not covered under warranty. Do not use damaged media. -
Page 4: Burner Media
Place the burner media over the the entire burner in a single, staggered layer. Do not block the air openings in the ends of the burner as shown in Figure 2.1.01 and Figure 2.1.02. To cover the pilot shield, place an extra layer along the front of the pilot shield as shown in Figure 2.1.03. -
Page 5: Black Embers
Do not use damaged media. Place the burner media over the the entire burner in a single, staggered layer. Do not block the air openings in the ends of the burner as shown in Figure 2.2.01 and Figure 2.2.02. To cover the pilot shield, place an extra layer along the front of the pilot shield as shown in Figure 2.2.03. -
Page 6: River Rocks
Installation 2.3 River Rocks The following images show installation of Mississippi River Rocks. The installation steps are the same for the Santa Cruz River Rocks. Before installing the rocks, place the Jet Black Fire Beads along the burner. Figure 2.3.01: Starting with the larger rocks, place the rocks over the the entire burner in a single, staggered layer. -
Page 7: Silhouette Log Set
Installation 3.0 Silhouette Log Set Silhouette Log Sets may be used to customize the look of your burner media. The logs are available in white, black, and grey. Each set includes two (2) logs. • A maximum of 14 logs (7 sets) may be installed in any color combination in the 50-DVTE36CN-1. -
Page 8: Premium Log Sets
Installation 4.0 Premium Log Sets The following instructions show the installation of the Grand Timber and Silver Birch Log Sets with Black Embers. You may install Log Set A alone or install Log Set A and Log Set B to achieve a denser fire package. •... - Page 9 Installation Kōjin 50 Figure 4.1.05: 999-LS-GTA only Figure 4.1.06: 999-LS-GTA and 999-LS-GTB Figure 4.1.07: 999-LS-SBA only Figure 4.1.08: 999-LS-SBA and 999-LS-GTB...
- Page 10 Installation Kōjin 62 Figure 4.1.05: 999-LS-GTA only Figure 4.1.06: 999-LS-GTA and 999-LS-GTB Figure 4.1.07: 999-LS-SBA only Figure 4.1.08: 999-LS-SBA and 999-LS-GTB...
-
Page 11: Installing Log Set A Only: 50-Dvte36Cn-1
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the package. Please report any damage immediately to your Authorized Archgard Dealer. NOTE: Improper placement of logs and embers may cause soot accumulation on the internal parts and glass. This is not covered under warranty. - Page 12 Installation Step 2: Place Log 1A in the left, rear corner of the firebox as Step 3: Place Log 2A in the right, rear corner of the firebox. shown. Figure 4.2.04: Figure 4.2.05: Step 4: Place Log 3A with the forked end resting on Log 1A and Step 5: Rest Log 4A on the end of Log 1A.
- Page 13 Installation Step 8: Place Log 7A along the front of the burner on the left side. Step 9: Rest the end of Log 8A with the back on the edge of the burner and the front on the front edge of the burner surround. Figure 4.2.10: Figure 4.2.11: Figure 4.2.12: Log 08A Detail...
- Page 14 Installation Figure 4.2.14: Grand Timber Log Set A Part Numbers Burner Media Options When Using Set A ONLY Part # Description Part # Description 50-DVTE36CN-1 999-LS-GTA Log Set A 999-LS-GTA-1 Log 1A 31-RR Mississippi River Rocks 1 Kit + 999-FB-JB35...
-
Page 15: Installing Log Set A Only: 62-Dvte46Cn-1
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the package. Please report any damage immediately to your Authorized Archgard Dealer. NOTE: Improper placement of logs and embers may cause soot accumulation on the internal parts and glass. This is not covered under warranty. - Page 16 Installation Step 2: Place Log 3A in the left, rear corner of the firebox as Step 3: Place Log 1A in the middle of the firebox, bridging the shown. burner as shown. Figure 4.3.04: Figure 4.3.05: Step 4: Place Log 5A in the right side of the firebox. Do not block Step 5: Place the back of Log 2A on the right side of 3A.
- Page 17 Installation Step 7: Place the front of Log 7A on the middle of 5A. The back edge should rest in the right, rear corner of the firebox, bridging the burner. Figure 4.3.10: Figure 4.3.11: Detail view Step 8: Place the back of Log 8A on the right side of 3A. The Step 9: Place the front of Log 6A on the middle of Log 1A.
- Page 18 Installation Figure 4.3.15: Grand Timber Log Set A Part Numbers Burner Media Options When Using Set A ONLY Part # Description Part # Description 999-LS-GTA Log Set A 31-RR Mississippi River Rocks 2 Kit + 999-FB-JB35 999-LS-GTA-1 Log 1A Jet Black Fire Beads...
-
Page 19: Installing Both Log Sets: 50-Dvte36Cn-1 & 62-Dvte46Cn-1
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the package. Please report any damage immediately to your Authorized Archgard Dealer. NOTE: Improper placement of logs and embers may cause soot accumulation on the internal parts and glass. This is not covered under warranty. - Page 20 Installation Step 2: Place Log 1A in the right, rear corner of the firebox as Step 3: Place Log 1B in the left, rear corner of the firebox. shown. Figure 4.4.04: Figure 4.4.05: Figure 4.4.06: Logs 1A and 1B in place. Step 4: Place Log 2A in the middle.
- Page 21 Installation Step 5: Log 2B spans the burner with the back end between Log 1B and Log 2A. Figure 4.4.09: Figure 4.4.08: Step 6: Place Log 3A as shown with the single end on top of Log 1A and the split end in front of the burner. Figure 4.4.10: Figure 4.4.11: Step 7: Log 3B rests on Log 1B with the front edge toward the front of the burner.
- Page 22 Installation Step 8: Place Log 4A on Log 1A with the branched end toward the front of the burner. Figure 4.4.15: Figure 4.4.14: Step 9: Place Log 4B toward the front of the burner with the longer branch resting on Log 3A. Figure 4.4.16: Figure 4.4.17: Step 10: Place the back of Log 5A where Log 1A and Log 2A meet.
- Page 23 Installation Step 11:Place Log 6A with the back on top of Log 1B and the front aligned at the front of the burner. Figure 4.4.20: Figure 4.4.21: Step 12: Place Log 7A with one end on Log 6 and the split end aligned toward the front of the burner. Figure 4.4.23: Figure 4.4.22: Step 13: Place the split end of Log 8A on top of Log 2B with the front edge aligned at the front of the burner.
- Page 24 Installation Step 14: Spread Black Embers along the burner surround and logs in an even layer. Do not block the secondary air openings as shown in Figure 4.4.02 and Figure 4.4.03. Figure 4.4.26:...
- Page 25 Installation Overview - Both Log Sets: 50-DVTE36CN-1 Figure 4.4.27: Grand Timber Log Set Part Numbers Burner Media Options When Using Set A & Set B Part # Description Part # Description Part # Description 999-LS-GTA Log Set A 999-LS-GTB Log Set B...
- Page 26 Installation Overview - Both Log Sets: 62-DVTE46CN-1 Figure 4.4.29: Grand Timber Log Set Part Numbers Burner Media Options When Using Set A & Set B Part # Description Part # Description Part # Description 999-LS-GTA Log Set A 999-LS-GTB Log Set B...
- Page 27 NOTES...
- Page 28 ARCHGARD INDUSTRIES LTD. 7116 BEATTY DRIVE MISSION, B.C. V2V 6B4 CANADA WEBSITE: WWW.ARCHGARD.COM...
Need help?
Do you have a question about the Burner Media and is the answer not in the manual?
Questions and answers