Table of Contents
Advertisement
Symbol label
On the back of the charging status control
unit there is a summary label, fi g. 9,
which shows some symbols.
The main ones are listed below:
this symbol indicates a risk of
electric shock.
this symbol indicates a general
dangerous situation.
This symbol shows the minimum
operating temperature of the
charging status control unit in
accordance with IEC 61851 and
IEC 62752 certifi cation.
NOTE FCA guarantees that the
device has been tested for use
from -40°C to +50°C.
If the device is not used and must
be stored, the temperature must
be between -40°C and +80°C.
Exceeding these temperature
values may damage the device.
The presence of this symbol
on the label indicates that the
specifi c "Mode 2" charge cable
cannot be used for domestic
power distribution networks
where the earthing cable is not
present. For specifi c markets,
without the grounding cable,
check for "COUNTRY GROUP" on
the label (fi g. 9).
the presence of this symbol
on the label indicates that the
charging status control unit
does not have the function of
disconnecting the earthing cable.
the symbol indicates that the
charging unit should not be
placed in the waste if it no longer
works: for disposal refer to the
environmental regulations in
force in the country in which it
circulates.
the symbol prompts you to read
the instructions in this publication
carefully before using the
charging cable.
9
J0B6002E
23
Advertisement
Table of Contents
