Advertisement
Available languages
Available languages
1.
Prepare and paint roof spoiler according to the painting instructions.
2.
Preparation
2.1
Use fine sand paper and sand inner mounting surface of the TECHART headlamp and
headlamp washer covers.
2.2
Clean the sanded areas of the TECHART headlamp and headlamp washer covers and
the mounting surface of the OE headlamps and headlamp washer nozzles prior to
mounting.
WARNING: Do not touch either of the mounting surfaces once they have been cleaned!
3.
Mounting TECHART – headlight panels
3.1
Apply a thin even bead of the supplied PU-glue to the TECHART headlamp and
headlamp washer covers. Be sure to use the supplied rubber gloves.
3.2
Mount the TECHART headlamp covers to the OE headlamps. Be sure to check the
alignment and fitment before applying pressure. Once properly aligned, apply even
pressure to the TECHART headlamp covers. Clean excess glue immediately with an
approved cleaner or brake cleaner.
3.3
Mount the TECHART headlamp washer covers to the OE headlamp washer nozzles. Be
sure to check the alignment and fitment before applying pressure. Once properly aligned,
apply even pressure to the TECHART headlamp washer covers. Clean excess glue
immediately with an approved cleaner or brake cleaner.
3.4
Secure the TECHART headlamp and headlamp washer covers with tape once properly
aligned. Allow 12 hours for the glue to cure.
MONTAGEANLEITUNG
Mounting instructions
3/3
Advertisement
