IBC SFC-199 Fuel Conversion Instructions page 2

Combustion Test Target Ranges
Figure: Gas valve and fan
The Low Fire (zero-offset) valve adjustment cap on the gas valve has been factory set. Do not adjust this screw in the field
unless indicated i n these instructions.
After converting the appliance to propane, a combustion (CO
properly functioning and calibrated combustion analyzing equipment and the results compared to the values in Table 1.
Propane
Max. CO value
2
Min. CO value
2
Table 1 - CO values at High and Low Fire
2
2 |
) reading must be taken by a qualified technician using
2
CO Value (%) at High Fire with front
2
cover open
11.5%
9.8%
CO Value (%) at Low Fire with front
2
cover open
Value at High Fire Minus - 0.3%
9.5%