Canon iR3530 Service Bulletin page 32

Code Detailed Name/Outline
code
E5F8 0001
0002
The saddle
connector
error
0003
Detected spec. Action on error
The connector Connect the connector
of the guide of the guide home
home position position sensor. Check
sensor is found the cable. Replace the
disconnected. finisher controller
The connector PCB.
of the guide
home position
sensor (PI13S)
The connector Connect the connector
of the paper of the paper push plate
push plate home position sensor.
home position Check the cable.
sensor is found Replace the finisher
disconnected. controller PCB.
The connector
of the paper
push plate
home position
sensor (PI14S)
The connector Connect the paper push
of the paper plate leading edge
push plate position sensor. Check
leading edge the cable. Replace the
position sensor finisher controller
is found PCB.
disconnected.
The connector
of the paper
push plate
leading edge
position sensor
(PI15S)
iR4570-008
(32/36)