Canon iR3530 Service Bulletin page 14

1-10. Error Code
In keeping with the exclusion of the Finisher Q3, Saddle Finisher Q4, and Puncher Unit L1/N1/P1 from the options,
the error codes related to the above have been deleted from the list.
Deleted error codes are described below.
Some of the error codes apply to the Finisher S1 and Puncher Unit Q1/S1/T1, therefore, applicable error codes will
be displayed when any of the options is installed.
Code
E500
E503
E505
Detailed Name/Outline
code
0001 Communicati
on error
between the
finisher and
the machine
0002
Communicati
on error within
0003
the finisher
0001
Back-up
memory error
in the finisher
0002
Detected spec. Action on error
Replace the finisher
controller PCB. Check
the cable. Replace the
DC controller PCB.
An error Replace the finisher
occurs in the controller PCB.
communica- Replace the saddle
tion between controller PCB. Check
the finisher the cable.
and the saddle
unit
An error Replace the finisher
occurs in the controller PCB.
communica- Replace the punch
tion between driver PCB. Check the
the finisher cable.
and the punch
unit
Turn off the main
An error power, check the
occurs in the wiring of the DC
data stored in controller PCB/the
the backup finisher PCB, check the
memory. fuse of 24-V, and turn
on the main power.
The EEPROM Replace the punch
data on the driver PCB. Replace
punch unit is the finisher controller
faulty. PCB.
iR4570-008
(14/36)