Status Leds - RAYLASE SUPERSCAN II Manual

Basic information
2.8

Status LEDs

The status LEDs allow you to check important functions and statuses of the deflection unit.
They are located on the front or on the top of the deflection unit (depends on type).
LED arrangement
MN065_v1.0.1
Name Color Meaning
D1 red CLK error
D2 red Parity error X
D3 red Parity error Y
D4 green Temp. error X
D5 green Temp. error Y
D6 orange New data X
D7 orange New data Y
D8 red Error X
D9 red Error Y
D10 green +VCC
D11 green -VCC
Incorrect data transmission.
Malfunctioning cable.
Temperature status exists if
LEDs are on.
New data transmitted if LED is
on.
Galvanometer scanner or driv-
er faulty.
Power supply is faulty, if LEDs
flicker.
The power supply is operating
properly if LEDs are on.
2-Axis Laser Beam Deflection Unit SS-II
Chapter 2
11