Table of Contents
Advertisement
Installation
General notes on use according to ATEX and IECEx
To comply with EC Directive 2014/34 EU (ATEX114) or the conditions of IECEx, this
enclosure or cabinet must meet the requirements of at least IP54 in compliance with
EN 60529.
EXPLOSION HAZARD
The equipment is intended to be installed within an enclosure/control cabinet. The inner
service temperature of the enclosure/control cabinet corresponds to the ambient
temperature of the module. Use installation wiring connections with admitted maximum
operating temperature of at least 10 °C higher than maximum ambient temperature.
Wall mounting is only permitted if the requirements for the housing, the installation
regulations, the clearance and separating regulations for the control cabinets or housings
are adhered to. The control cabinet cover or housing must be secured so that it can only be
opened with a tool. An appropriate strain-relief assembly for the cable must be used.
Wall mounting outside of the control cabinet or housing does not fulfill the requirements of
the FM approval.
28
WARNING
WARNING
WARNING
WARNING
Operating Instructions, 07/2018, C79000-G8976-C496-01
SCALANCE M804PB
Hide quick links:
Advertisement
Table of Contents
